10X6-180
The 10X6-180 is a Leakage and Low Level Measurements Chamber.
Designed for leakage measurements. Cross-section of 100 cm2 and volume of 180 cm3. Also for very low dose to image receptor.
10X6-1800
The 10X6-1800 is a Radiation Protection Chamber.
For low-level radiation measurements such as shielding leakage, irradiator and environmental. Unlike typical survey meters, the 1800 cm3 volume chamber offers improved accuracy over a wider dynamic range.
10X6-0.6CT
The 10X6-0.6CT is a Modern Wide Beam Multi-Slice CT Chamber.
0.6cc thimble chamber as described in the AAPM Report No. 111 “Comprehensive Methodology for the Evaluation of Radiation Dose in X-ray Computed Tomography.” Ideal for dose measurements in modern wide beam multi-slice CT. Calibrated using X-rays @ 150 kVp, Phantom adapter included.
10X6-3CT
The 10X6-3CT is a Computed Tomography Dose Index (CTDI)and DWP or DLP Chamber.
Although designed specifically for CT X-ray beam measurements, either free-in-air or mounted in a head or body phantom, it can be used for DWP and DLP applications such as Dental x-ray measurements, due to the chambers excellent energy and partial volume response as well as uniformity along its entire 10 cm active length.
10X6-500
Leakage Measurement Chamber
A single sensor leakage measurement solution for very low-level radiation measurements such as shielding, leakage, irradiators and environmental that is part of the Accu-Gold family of systems. Equivalent to the Fluke® 96010A Ion Chamber used in the Fluke® Radiation Leakage Detection System, this chamber meets 21 CFR 1020.30(k) for leakage measurement requirements.
TOR DEN conventional
Leeds Test Objects′ TOR DEN conventional phantom is designed to be used to check the image quality performance of conventional dental x-ray systems. These tests should be carried out at acceptance to establish a baseline, and on a routine basis, keeping an on-going record of the test results, which will indicate any deterioration in performance.
TOR DEN conventional is used for units with conventional film-based image acquisition, and enables the following tests to be made:
- Optical Density Constancy
- Radiation Field Alignment
~ for Panoramic and Cephalometric tests only
The phantom is supplied with a positioning device, for TOR DEN conventional this is a magnetic jig. For systems with no magnetic receptor, a suction jig is also available. The TOR DEN phantoms are supplied in a tough case with a bespoke foam insert.
20V40P
Sturdy waterproof carry case for 10X5 or 10X6-1800 (Nanuk)
DENTEST
Leeds Test Objects’ DENTEST is a routine test object, or medical imaging phantom, designed to be used quickly and easily on a regular basis (e.g. monthly) to provide an ongoing check of imaging performance, particularly those aspects which are most liable to deterioration. After an initial uniformity check, image quality is measured simply by counting the number of resolvable steps, contrast details and resolution meshes in the image. An ongoing record of these numbers will reveal any trend towards deterioration in imaging performance.
Used for dental radiography, DENTEST enables the following checks to be made:
- Uniformity
- Dynamic range
- Low contrast resolution
- Detector homogeneity
CT AEC
CT AEC (Computed Tomography Automatic Exposure Control) phantom is used for constancy testing of CT AEC systems.
CT AEC includes:
- 11x PMMA ellipses of 25mm thickness (different height and width so that they can be re-configured into any order)
- Each step contains a central hole to accommodate a choice of:
– Blank inserts for AEC checks (supplied)
– Tubes to accommodate pencil ion chambers for dosimetry (supplied)
– SEDENTEXCTIQ image quality inserts (available separately) - 2 x sturdy end plates with integral carry handles and adjustable height and length nylon supports
- Spirit level and pigment-filled centre markings (for easy and reproducible positioning)
- Wheeled protective storm case with telescopic handle
This design is protected under Community Design Registration No. 002419572-0001
Also available with 50mm thick ellipses as CTAEC-50
Accu-Gold 2 (Accu-Gold Windows Application)
The Accu-Gold software presents a common look and feel across the entire Radcal x-ray diagnostic product line. The user configurable display presents up to 16 parameters at once. Accu-Gold Software is provided with all Accu-Gold+ Family Digitizers.
A convenient, simple to use interface makes waveform and pulse-to-pulse analysis a snap.