The 10X6-0.18 is a High Dose Rate Chamber. For in-beam measurements of high-intensity gamma radiation. Gamma irradiators and beam type irradiators. The fully guarded chamber is mounted at the end of a 3 m low noise triax cable.
Get Service for the 10X6-0.18 here
The 10X6-0.6 is a High Dose Rate Chamber.
This high dose rate chamber provides an excellent response at therapy and other high energy, high dose rate applications. The fully guarded chamber is mounted at the end of a 12 m low noise triax cable. Can be used with or without build up cap depending upon the application.
Get Service for the 10×6-0-6 here
The 10X6-6 is a General Purpose In Beam Chamber.
A well documented wide dynamic range chamber with many dose and rate applications. Also recommended for measuring exposure time in Auto Dose mode.
The 10X6-6M is a Dedicated Mammography Chamber.
A world standard for mammography, ready for any mammographic tube track-filter combination. Extraordinary flat energy response over 10 – 40 keV has been documented in technical papers and makes corrections unnecessary. Also recommended for measuring exposure time in Auto Dose mode.
The 10X6-10 is a General Purpose In Beam Chamber.
This 10cc multi-purpose ion chamber is suitable for measuring R&F as well as fluoro. Its small size (5cm diameter x 1cm thick), excellent energy response and x-ray transparency makes it ideal for those difficult measurements where space is at a minimum.
The 10X6-60 is a Service and Image Intensifier Chamber.
The dynamic range and thin profile is ideal for Input Dose at the Image Intensifier, High dose rates encountered in Fluoroscopy and Cine, spot film devices & other special procedures.
