The T3 Rapid-Gold+ supports Radcal’s solid-state dose sensors, solid-state multi-sensors, and current probes. The Rapid-Gold+ Touch is an excellent stand-alone solution for Radiography, Fluoroscopy, Mammography, and Dental diagnostic x-ray applications. It’s ability to store machine specific Profile files saves time by eliminating manual user settings and often only one exposure is needed. For example, when using the Mammo Combo Mode Profile, with a Single exposure kV, Time, dose, and dose rate are captured for each region. T3’s CBCT Profile allows for the capture of DAP, kV and Dose with one exposure. A great time savings is that Frequently used Profiles can be saved as favorites.
The T3 Accu-Dose+ Pro with its Customizable Data capture profile page and its unique machine profiles make it the most cost-effective stand-alone instrument in Radcal’s T3 Series. Supporting Radcal’s gold standard ion chambers and solid-state dose sensors, it is an excellent system for dose measurements in Radiography, Fluoroscopy, Mammography, CT, and Survey applications.
The T3 Rapid-Gold+ Pro supports Radcal’s solid-state dose sensors, solid-state multi-sensors, and current probes. The Rapid-Gold+ Touch is an excellent stand-alone solution for Radiography, Fluoroscopy, Mammography, and Dental diagnostic x-ray applications. It’s ability to store machine specific Profiles files save time by eliminating manual user settings and often only one exposure is needed. For example, when using the Mammo Combo Mode Profile, with a Single exposure kV, Time, dose, and dose rate are captured for each region. T3’s CBCT Profile allows for the capture of DAP, kV and Dose with one exposure. A great time savings feature is frequently used Profiles which can be saved as favorites.
The Pro Series adds wired and wireless computer interfaces to the T3 stand-alone system. With this interface, the Accu-Gold 3.0 Windows software provides a feature-rich and user-friendly environment in which to perform your measurements. Stream-lined Excel reporting and advanced waveform analysis are among many useful capabilities. Android and IOS applications are available for R/F – please contact Radcal for details.
The T3 Accu-Dose+ Pro with its Customizable Data capture profile page and it’s unique machine profiles make it the most cost-effective stand-alone instrument in Radcal’s T3 Series. Supporting Radcal’s gold standard ion chambers and solid-state dose sensors, it is an excellent system for dose measurements in Radiography, Fluoroscopy, Mammography, CT, and Survey applications.
The Pro Series adds wired and wireless computer interfaces to the Touch stand-alone system. With this interface, the Accu-Gold 3.0 Windows software provides a feature-rich and user-friendly environment in which to perform your measurements. Stream-lined Excel reporting and advanced waveform analysis are among many useful capabilities. Android and IOS applications are available for R/F – please contact Radcal for details.
The Model 8161AFFT Fluoro Tool is a fluoroscopic contrast resolution test tool. The test tool consists of two 6″ x 6″, 6.1 mm (¼”) thick aluminum plates with each plate containing an array of 1.1 cm targets of varying contrast. Also included in the Fluoro Tool kit are three 6″ x 6″, 1 mm thick copper sheets. The test tool is designed to be used with the copper attenuator sheets positioned close to the source (i.e., at table top) and the aluminum test plate located close to the image detector input as illustrated in Figure 1.
With 2 mm of copper attenuator in the beam and a fluoroscopic x-ray tube potential of 80 kVp, the contrast of the targets in Plates A and B are given in Figure 2 and 3, respectively. Each plate has three columns of three targets with a moderately large (@3%) contrast increment between adjacent targets in the same column. The outer two columns have increasing target contrast increments while the middle column is offset and has decreasing increments. At 80 kVp with 2 mm of Cu attenuator the targets range in contrast from @1% to @9% in Plate A (integer phantom) and from @0.5% to @8.5% in Plate B (half-integer phantom).
Complete Kit – 8161AFFT
Includes: 1 ea Contrast Test Plates A and B 3 1mm Cu Attenuators 1 Attenuator Holder 1 Flat Top Plate 1 Circular Port Top Plate 6 Bungee Fasteners (2) 18″ L, (2) 24″ L, (2) 30″ L 1 Soft Carry/Storage Case 1 User Manual
Basic Kit – 8161AFFT-P
Includes: 1 ea Contrast Test Plates A and B 3 1mm Cu Attenuators 1 Soft Carry/Storage Case 1 User Manual
Accessory Kit – 8161AFFT-A
Includes: 1 Attenuator Holder 1 Flat Top Plate 1 Circular Port Top Plate 6 Bungee Fasteners (2) 18″ L, (2) 24″ L, (2) 30″ L
The T3 Rapid-Gold+ Pro supports Radcal’s solid-state dose sensors, solid-state multi-sensors, and current probes. The Rapid-Gold+ Touch is an excellent stand-alone solution for Radiography, Fluoroscopy, Mammography, and Dental diagnostic x-ray applications. It’s ability to store machine specific Profiles files save time by eliminating manual user settings and often only one exposure is needed. For example, when using the Mammo Combo Mode Profile, with a Single exposure kV, Time, dose, and dose rate are captured for each region. T3’s CBCT Profile allows for the capture of DAP, kV and Dose with one exposure. A great time savings feature is frequently used Profiles which can be saved as favorites.
The T3 Accu-Dose+ Pro with its Customizable Data capture profile page and it’s unique machine profiles make it the most cost-effective stand-alone instrument in Radcal’s T3 Series. Supporting Radcal’s gold standard ion chambers and solid-state dose sensors, it is an excellent system for dose measurements in Radiography, Fluoroscopy, Mammography, CT, and Survey applications.
