by Vicky Chen | Nov 6, 2016 | Current Probes
The 90M10-AG and 90M10 are Non-Invasive Clamp on Sensors.
The mAs sensor connects to models Accu-Gold / Rapid-Gold / Accu-Pro / Accu-kV and couples to the X-ray generator by clamping to the X-ray anode HV cable (clamps up to 23mm diameter).
The Accu-Pro and Accu-kV require a kV sensor in-beam as a trigger source.
To measure Anode current, clamp on the anode cable with the arrow on the clamp pointing towards the X-ray tube. For best results, do not move clamp before and during a measurement or place next to the X-ray tube.
by Vicky Chen | Nov 6, 2016 | Solid State Multi-Sensors
The AGMS-D+ is a Solid State kV/Dose Multisensor for Diagnostic Range Measurements.
A small Solid State multi-parameter sensor used for single exposure and fluoroscopy. It measures dose, dose-rate, time, kVp with FFT analysis, HVL, and beam filtration. It features correction of dose for beam quality.
by Vicky Chen | Nov 6, 2016 | Solid State Multi-Sensors
The AGMS-M+ is a Solid State kV/Dose Multisensor for Mammographic Range Measurements.
A small Solid State multi-parameter sensor used for Mammography. It measures dose, dose-rate, time, kVp with FFT analysis, HVL, and beam filtration. It features correction of dose for beam quality.
by Vicky Chen | Nov 6, 2016 | Solid State Multi-Sensors
The AGMS-DM+ is a Solid State kV/Dose Multisensor for Diagnostic and Mammographic Range Measurements.
A small Solid State multi-parameter sensor used for single exposure and fluoroscopy. It measures dose, dose-rate, time, kVp with FFT analysis, HVL, and beam filtration. It features correction of dose for beam quality.
by Vicky Chen | Nov 6, 2016 | Carrying Cases
Accu-Gold carry case triple layer (Nanuk)
The 90M10-AG and 90M10 are Non-Invasive Clamp on Sensors.